Yiwa X-Axis Power Milling Machine. [450 LB Torque ] Power Feed Table Mill.110V. 0-200PRM Adjustable Rotate Speed. White

Yiwa Z-Axis Power Feed Kit

Specifications

Voltage: 110V. 50/60Hz

Rotate Speed: 0-200 RPM

Max Torque: 450 in-lb

Max Feed Rate: 650 mm/min

Max Return Speed: 850 mm/min

Control: Manual

Dimension: 8×4.5×13

Package Size: 11.8×8.7×13.8

Gross Weight: 16.5 lbs

Package Content

1 x Power Feed for Milling Machine

8 x Adjustable Pad

2 x Travel Stop Assembly

1 x Adapter

1 x Bevel Gear

1 x Dial Nut

1 x Locking Nut

1 x Product Manual

• X-Axis Type: The X-axis power feed is made of aluminum with power specifications of 95 watts. 110V input voltage. 50/60Hz. and single-phase. It features a rotational speed of 0-200 RPM. maximum torque of 450 inch-pounds. maximum feed rate of 650 mm/min. and maximum return speed of 850 mm/min.
• Automatic and Manual Control: You can set this power feed to operate at a constant automatic speed to free your hands or manually adjust the speed using the control knob for more precise milling tasks. This multifunctional milling power feed allows excellent speed control throughout its range based on your needs.
• Stable and Efficient: Equipped with Gleason spiral bevel gears. this power feed offers stable gear ratios. low operating noise. high efficiency. and strong load capacity. In case of a collision between the tool and workpiece during rapid transmission or sudden reversal. a special safety device protects the plastic gears and electronic components from damage.
• Portable and Easy to Install: This milling power feed features a compact structure for easy portability. Weighing 5kg (11 lbs) and measuring 7 x 4.5 x 11.5 inches. both beginners and experienced operators can easily install this power feed by following the included instructions and online videos.
• Wide Application: This power feed is compatible with various milling machines. It is suitable for vertical knee-type milling machines with similar mounting patterns and a 5/8-inch diameter spindle. However. it is not suitable for milling machines with different mounting patterns or differing screw sizes. so please ensure your machine is of the typical Bridgeport type as described.