Vixen Air Suspension Kit for Truck/Car Bag/Air Ride/Spring. On Board System- 200psi Compressor. 5 Gallon Aluminum Tank. For Boat Lift.Towing.Lowering.Load Leveling Bags.Train Horn.Semi/RV VXO4852A

This on-board system is specifically designed for air suspension but can also be used with any high-pressure air horn or power tool that requires an on-board air system. Comes with a 6 Gallon aluminum air tank featuring 9 air ports. one 200 PSI heavy duty chrome look air compressor with remote filter kit. pressure switch. drain valve. heavy duty 40A relay with pre-wired plug. 40A in-line fuse and mounting hardware. This system will set your vehicle above the rest. Air Compressor 200 PSI Air Compressor Chrome Color 12V Permanent Magnetic Motor Maximum Working Pressure: 200 PSI Duty Cycle: 100% @ 100 PSI Amperage Draw: 23A Flow Rate: 1.8CFM @ 0 PSI Automatic Reset Thermal Overload Protector 3/8" NPT Stainless Steel Braided Leader Hose with 3/8" NPT Check Valve Intake Air Filter with Remote Installation Kit (10 FT Hose and Two replacement filter elements Included) 40A 4-PIN Relay with Pre-wired Plug 40A In-line Fuse with Waterproof Holder Mounting Hardware Included Dimensions: 13-¾" L x 4" W x 6-¾" H Air Tank 6 Gallon Aluminum Air Tank Capacity: 6 Gallon (22 Liter) Pressure Rating: 200 PSI 9 Ports: 4 x ½" NPT. 2 x 3/8" NPT. 3 x ¼" NPT Powder Coated Finish Included with this kit: 6 Gallon Aluminum Air Tank 170-200 PSI Pressure Switch ¼" NPT Wing Style Drain Valve Mounting Hardware Dimensions: 21" L x 11-¾" H x 9-½" Dia

• 6 GALLON AIR TANK (22 LITER) / 9 PORTS – Whether you are using this kit for a suspension system. train horn or both. this tank will give you enough capacity and ports for all your needs. Large diameter ports will prevent the bottle necking that you may find on air tanks with smaller ports
• ALUMINUM CONSTRUCTION – A tank made of aluminum has the benefit of being much lighter compared to a standard steel tank while being also 100% resistant to rust. The exterior has been powder coated in silver color for an additional layer of protection while adding a stylish finish
• 200 PSI COMPRESSOR – A efficient 12V compressor with an air flow rate of 1.8CFM and 3/8 NPT hose that will rapidly fill up your air tank for high air demand applications such as air suspension. train horns. tire inflation and air tools. Equipped with a thermal overload protector switch that protects the unit by preventing the motor to overheat
• SEALED AND MAINTENANCE-FREE COMPRESSOR – A moisture and dust resistant sealed design for optimal protection against the elements and a permanently lubed pump’s cylinder that requires no future lubrication for convenient use
• ACCESSORY PACK – Includes a remote filter installation kit that allows you to move the pump’s air intake to a location less exposed to dust and moisture than were the compressor is installed. A pressure switch. drain valve. fuse. relay with pre-wired plug and mounting hardware form part of this kit