Teissuly Car HVLP SprayGun With 3Nozzles and 600cc Cups.Car.Topcoat.Touch-Up

Teissuly Car HVLP SprayGun With 3Nozzles and 600cc Cups.Car.Topcoat.Touch-Up
Car HVLP SprayGun With 3Nozzles and 600cc Cups.Car.Topcoat.Touch-Up
NEW – Aluminum Alloy Body With Plating For Ease Of Clean Up And Durability.
EASY TO CLEAN – Mesh Filter Removes Dirt Particles From paint. Defects. Stainless steel needles and nozzles are water based paints.
ENVIRONMENTALLY FRIENDLY DESIGN – fluid. pattern and. Designed to provide atomization and size for all kinds of surface painting. Saves 20% paint and provides optimal performance.
HUMANIZED CONSIDERATION – Special conical shape of cap prevents paint from splashing. Mesh filter removes dirt particles from paint. defects. 600cc PVC cup allows viewing of paint fluid level and save time on loading. Copper diverterValve for good sealing performance.
Product description
Specification:
Nozzle diameter: 1.4mm
Spraying distance: about 30cm
Spraying distance: 15-24cm
interface: G1/4
Supply mode: pneumatic
Cup capacity: 600cc
consumption: 14.5CFM
Working pressure: 2-3.5 bar
Pattern width: 160-240mm
size: 10CM diameter
Type: Large capacity and low pressure
Fluid nozzle: 1.4mm. 1.7mm. 2.0mm
SprayGun material: aluminum alloy
Package:
1 x SprayGun
1 x 600cc Cup
3 x Nozzles
3 x Needles
Precautions:
1. Choose clean compressed
2. Choose suitable spraying equipment for workplace
3. Before connecting the pipe. whether the parts of the SprayGun are complete and firm.
4. It is strictly to point the tip of the SprayGun to yourself or others to avoid harm caused by misoperation.
5. Wear knee protection equipment when working (because there will be paint mist when spraying)
Instructions:
1. Before spraying for the first time. you need to clean the in the paint channel. add the release to TheGun pot. and try to filter the inside of the SprayGun to ensure cleanliness
2. Adjust the appropriate spraying pressure when spraying
3. Control the angle and distance between SprayGun and spray parts during spraying
4. pulling the before pre-spraying. the first be used for BlowingDust
5. The paint flowing through the nozzle in the second gear is sprayed and atomized at the same time
6. According to the customer’s paint. adjust the spice plug to control the process of TheGun needle. and adjust the size of the paint
7. According to the customer’s spraying range. adjust the size. width and narrowness of the atomized spray to achieve a complete spraying effect
8. use. clean the cap and nozzle in time (first pour out the paint in TheGun. then add the and pull the while shaking to make the remaining paint spray out of the SprayGun. Then the cap to clean If the cap is too dirty. you need to soak the for a period of time before cleaning. Be careful not to damage the holes on the cap during cleaning. removing the cap. you must the nozzle and the nozzle from being scratched. Damage to the cap hole will affect the atomization effect.)

• Teissuly Car HVLP SprayGun With 3Nozzles and 600cc Cups.Car.Topcoat.Touch-Up
• NEW – Aluminum Alloy Body With Plating For Ease Of Clean Up And Durability.
• ENVIRONMENTALLY FRIENDLY DESIGN – fluid. pattern and. Designed to provide atomization and size for all kinds of surface painting. Saves 20% paint and provides optimal performance.
• Product description
• Nozzle diameter: 1.4mm
• Spraying distance: 15-24cm
• interface: G1/4