Pneumatic Shovel 250 Air Shovel Impact Pneumatic Rust Removal Gun Pneumatic Hammer Drill Tire Repair Tool

250 air-operated shovel is suitable for small casting sand removal and beveling before welding. and welding slag after welding. The flat weld scar and rust removal head can be used for the rust removal of the uneven surface of mechanical equipment. It can be used as an air shovel as well as Rust remover. simple structure and high efficiency.

Remove the rust on the car muffler pipe. the curling of the metal sheet metal. and the welding slag. Automobile industry exhaust pipe. sheet metal use and decoration construction. wall slotting and embedding. Cement plant concrete plant equipment and filling trucks knock down cement blocks and so on.

250 pneumatic shovel is suitable for baking paint. auto repair. hardware. ceramic lighting. stone processing. wall treatment (construction industry). craft carving. polishing and other operations.

The 250 air-operated shovel air inlet filter is designed to effectively filter impurities and prevent fines from entering the fuselage and damaging the machine. It can be used only when it is connected to the general air pipe.

• 50 air operated shovel with filter
• Moisture. dust. rust and other foreign objects in the compressed air are the main causes of premature aging of pneumatic tool parts. so it is necessary to install a filter. Filter the foreign matter in the air to provide clean and dry gas for the tools. The filter must have sufficient flow and be cleaned frequently. otherwise it will affect the normal operation due to insufficient flow. In addition. after an air compressor has been working for a period of time. a large amount of water will accumulate inside. which must be discharged regularly to ensure that the gas is dry.
• Lubrication of tools
• The 250 pneumatic shovel must be regularly and appropriately lubricated to ensure normal and long-term work. The correct lubrication method is achieved through the three-point combination device (water and oil grid). When the air flows through the water and oil grid. it will atomize the lubricating oil in the oil tank. and the choice of lubricating oil is also very important. Using incorrect lubricating oil will cause damage to the tools. Generally. special lubricating oil for pneumatic tools is used. It is strictly forbidden to use concentrated engine oil. If there is no water and oil grid device for the time being. put 3-4 drops of lubricating oil on the air inlet of the tool before and after work every day.
• It is mainly used to remove rust. welding slag. burr. concrete grooving. stone carving. sand cleaning of castings. etc.
• Equipped with four long shank chisels of different shapes. suitable for various work requirements.
• The air intake is adjustable and the speed can be adjusted.
• 250 pneumatic shovel features: long cylinder. standard accessories. good power. stable output
• One machine with multiple functions. capable of shoveling and hammering. high efficiency. standard type and high cost performance.