Manual Wire Stripping Machine. Manual Copper Wire Stripping Machine Portable Scrap Cable Peeling Stripper Tool (3 sets of wire feed wheels and 4 blades)

Product Description

HIGH EFFICIENCY

This wire stripping tool can strip two wires at the same time. which is greatly improving work efficiency.The pitch of the stripping wheels can be adjusted. ??1-30mm wires are all suitable.

HAND DRILL LINK INSTALLATION

The screws are firm and durable. can be disassembled and assembled at will. it is not easy to scrap the whole machine.

The electric drill can be connected to the side. which enhances the stripping speed.

THICKNESS SWITCHING

Multiple sets of wire feed wheels. you can freely switch the thickness of welding wire without adjustment. the stripped blade is a double-sided blade made of HHS front steel. which is not only sharp. but also durable and wear-resistant

Increase the role of the blade gear lever:

Easy to fix. more convenient and durable

The blade is installed on the knife holder. the blade is too far below. and it is easy to be disconnected if you use too much force when stripping.

The addition of the gear lever can better make the blade force evenly

APPLICATION

Manual wire stripping machine is suitable for steel wire with a diameter of 1-20mm. which greatly enhances the service life of scissors. which is more than 3-5 times that of wire.

Size: length 130 * height 140mm

Gross weight: 1.8kg

Stripping range; 1-30mm (direct wire)

Blade shape: double-sided blade

Blade size: 6mm*length 100mm

Daily production capacity: 50-100kg

Packing list:Wire stripping machine + blade*4

Operation Step??

The wire stripping tool must be fixed before use.

Put the wire in the bottom of the two wheels.

Insert the blade into the wire layer and lock the blade

There is no need to adjust the blade when strip the second wire. The blade holder can be rotated forward and backward.

Attention

Please don’t make two wheels hold the wire too tightly.

Because the wire will be squeezed while stripping. too tight will cause the wire to stay immobile.

Correct operation: Make the two wheels stuck on the wire. leaving a little gap for the wire.

• [High Efficiency]Using multiple tool holders. multiple wires can be operated at the same time
• [High Quality]The screws are firm and durable. can be disassembled and assembled at will. it is not easy to scrap the whole machine
• [Thickness Switching]Multiple sets of wire feed wheels. you can freely switch the thickness of welding wire without adjustment. improving work efficiency
• [Application]Manual wire stripping machine is suitable for steel wire with a diameter of 1-20mm. which greatly enhances the service life of scissors. which is more than 3-5 times that of wire.