LIDNGLN Hot Acrylic Plastic PVC Bending Machine Heater with Water Thermometer – 24 Inch 600mm – 110v/220v Heating Bender

Specifications????EU Plug

Input Voltage: Ac 220V
Heating : Zw-300 420 ??. The 250 ??
Bending Thickness: 1mm-6mm
Heating Width: 10-60 Cm
Power: 800W
Product Size: 60*5*4cm(23.6*2*1.6inch)
Net Weight: 3kg
Gross Weight: 3.05Kg
Package Dimensions (L x W x H): 87*20*12cm

Specifications???? Plug

Input Voltage: Ac 110V
Heating : Zw-300 420 ??. The 250 ??
Bending Thickness: 1mm-6mm
Heating Width: 10-60 Cm
Power: 800W
Product Size: 60*5*4cm(23.6*2*1.6inch)
Net Weight: 3kg
Gross Weight: 3.05Kg
Package Dimensions (L x W x H): 87*20*12cm

Packages:

1 X Acrylic Pvc Bending Machine Heater
1 X Water
2 X Silicone Tubes
1 X Temperature Controller
1 X Water Thermometer

Main Uses

Widely Used In Decoration Engineering. Sign Making. Display Cabinets. Aquarium Wrapping. Lighting Channel Letters. Supermarket Shelves. Curtain Walls. Large Light Boxes. Etc
Applicable Materials: Acrylic. Organic Board. Pvc And Various Thermoplastic Materials

Features

Temperature Adjustable – Product Temperature Uniform. Water Circulation Cooling.
Portable – Light And Practical. Space-Saving. Hot Bending Of Plastic Sheets Of Various Materials. Such As Thickness More Than 6 Mm
Can Heated And Down Simultaneously By Two Heaters
Can Combined With Multiple Heaters To Heat Multiple Bending Points One Time;
If Bending Thick Plates. Slotting Bending. Bending Angle Will More . You Can Adapt To Local Conditions. Flexible Use.
Can Combined With The Worktable Into a Hot Bending Machine. Can Also Used Alone.
There Water Circulation Cooling On Both Sides Of The Heating Tube To Ensure That There Will Thermal Deformation Except Where Heating Needed.
Power Supply And Water Pipe Are Connected Both Ends Respectively. Hydropower Separation Safe And Intuitive. Easy To Plug And Pull. Convenient To Collect. And Easy To Assemble With The Workbench.

Instructions

Keep a Cooling Tank (Barrel) Of More Than 30 Liters. First. Connect The Heater Body And The Submersible With a Silicone Hose. Place The Submersible In The Cooling Bucket. Connect The Power Supply Of The . And Wait The Water To Circulate Out. (Note: The Water Temperature Of The Machine Will Keep Rising a Long Time. Please Replace The Cold Water Clearly. The Temperature Of The Circulating Water Should Not Drop Abruptly. When The Water Temperature Exceeds 50 Degrees. The Power Supply Of The Heater Should Cut Off In Time. And The Circulating Water Should Replaced Later.)
Connect The Thermostat With The Hot Bender And Connect It To 220V Power Supply. Adjust The Knob Of The Thermostat Controller. The Clockwise Direction To Raise The Temperature. And Vice Versa. When Adjusting. It Not Appropriate To Rotate Too Fast In Order To Avoid Damaging The Thermostat. (Note: It Advisable To Slowly Adjust The Thermostat To a Reddish Heat Pipe. Excessive Temperature Will Cause Damage To The Hot Bending And Affect The Service Life Of The Hot Bender).
When The Heating Pipe Reaches The Required Temperature. It Can Place The Plastic Sheet Which Needs To Hot-Bended On The Heating Trough. When The Sheet Soft Enough To Folded Manually. It Can Bend Various Angles. According To The Different Materials. The Setting Time Different. Please Determine The Setting Time According To The Actual Situation.

Safety Precautions:
Product Heating Produces High Temperature. Heating Components Should Avoid Contact With Human Skin.
Please Pay Attention To The Use Of The Environment. Away From Inflammable And Explosive Goods.
If You Don\’t Use It a Long Time. Please Cut Off The Power In Time.