INTBUYING Welding Turning Rolls Linkage Roller Rack with Iron Wheel Dia200mm

Description:
This linkage welding equipment is professional welding assistant equipment. can be matched to welding operation machine and submerged arc welding machine. etc. The machine mainly applied to pipeline welding include inside and outside of the pipe.

Parameter
Voltage: 110V
Frequency: 60Hz
Power: 125W
Load Capacity: 2200 LBS/1000kg
Working speed: 80~1100 mm/min
Roller diameter: 7.87inch/200mm
Roller width: 1.97inch/50mm
Roller material: Iron
Operation Method: Control Box Operation
Net Weight (Active/Driven): 124.56lb/56.5kg

Attentions:
Before operating the unit. please read this instruction book thoroughly. and retain it for future reference.
1. Machine should be placed in dry. clean. ventilated position. the operation of the machine placed in a horizontal position and smooth. Keep away from flammables and explosives.
2. For safety reasons. must be connected to a reliable safety grounding device must have three feet with ground connection.
3. Unplug the power cable/cord. if the machine will not be used in a long time.

Maintenance Information
Users are responsible for the proper operation and maintenance of the equipment they use. Some equipment will quickly become damaged and unsafe if abused or subjected to improper demands. If equipment is regularly maintained and not abused. you will get the maximum safety and service performance from your casters.
Do not overload equipment
Do not use overcharged voltage
Do not use hands to stop the roller when the machine is working

Item Included: TT-022192
INTBUYING Welding Turning Rolls Linkage Roller Rack with Iron Wheel Dia200mm

• The welding tank turning roll has a rugged and stable construction. its maximum load capacity is 1000kg/2200lb. The rotating wheel is pure iron. so the surface will be worn. which is a normal phenomenon.
• The welding positioner has 2 holes inside and outside to choose from. Different sizes of pipes can be accommodated by adjusting the spacing of the rollers. It is suitable for workpieces with a diameter of 50-600mm/1.97-23.62 inches; inner hole: 50-260mm; outer hole: 260-600mm.
• The linkage welding equipment is equipped with a manual control box and a foot switch. the initiation and termination of roller wheel frame are easily taken under controlled. The manual control box can control the rotation speed. on/off. positive/roller frame reverse in real time.
• The foot switch has two operation modes: automatic mode. the wheel keeps rotating at the set speed; foot pedal mode. the operator can rotate the wheel in a small range through the foot switch to make the work piece jog or fine-tune.
• The rotary welding rolls mainly applied to pipeline welding include inside and outside of the pipe. especially suitable for welding applications of work pieces such as tanks. pipes. tubes. cylinders. etc.