Electric Spray Gun Decoration Spray Device 800ML 2.5MM Latex Paint Spray Gun——–.Complete Tasks Efficient

1. Airless Spray Gun

2 Spray evenly

3 adjustable spray strength

4 strong adhesion

5. Continuous speed regulation

• Characteristics:
• 1. Airless Spray Gun
• 2 Spray evenly
• 3 adjustable spray strength
• 4 strong adhesion
• 5. Continuous speed regulation
• 6. Easy to clean
• Specification:
• Model: GT-1288
• Name: Electric SPRAY GUN
• Power: 350W
• Injection pressure: 0.1-0.2Bar
• Maximum flow: 380 ml / min
• Maximum Viscosity: 50DIN-s
• Nozzle diameter: 2.5MM
• Pot capacity: 800ML
• Power cord length: 2.0M
• They include:
• 1 Set of Electric SPRAY GUN
• Cleaning steps
• 1. Pull out the . Unscrew and tighten the storage tank to make the storage tank air. press the trigger to make the residue in the spray gun
• Of paint returned to the storage tank
• 2. Unscrew the storage tank. Pour the remaining paint in the storage tank into the paint bucket
• 3. First clean the storage tank and straw with a brush
• 4. Pour the thinner or water (selected according to the characteristics of the paint) into the container. Reinstall the storage tank
• Put on the spray gun and reassemble the spray gun
• 5. Connect the power supply and start the machine to spray thinner or water until the sprayed liquid is clean
• 6. Close and open. unplug
• 7. Remove the nozzle and clean it
• 8. Reassemble the nozzle and pay attention to the position of the positioning ribs during assembly
• Warning! 1. Do not put the spray gun in water or solvent
• 2. Do not use the machine without a sponge filter
• Instructions for use
• 1. Before testing the viscosity. please fully stir the spraying material evenly
• 2. Except for the hook part. completely immerse the viscosity cup in the spraying material
• 3. Lift the viscosity arm hook and record the time at the same time. in seconds. until the liquid in the viscosity cup runs out
• Painting instructions
• Spray paint in accordance with the instructions in the instructions. do not tilt the vertical spray paint. and the spray paint distance is about 5-15cm.
• Every time the paint is sprayed. it must be cleaned with a special paint cleaner to keep it unobstructed and avoid paint blocking.
• Tips
• Please use professional paint cleaner to clean the product
• Can also use gasoline. pine perfume cleaning products
• Do not soak in pine perfume for a long time. it will melt
• Note! This product is not suitable for rough texture coatings. the use of these materials will cause permanent damage to the product
• common problem
• Q: There are spots or splashes in the spray. what should I do?
• Answer: The paint needs to be further diluted (100-200ml suitable thinner)
• Q: What is wrong if spraying is intermittent?
• Answer: There are three situations:.
• The pipette is loose. push it in to tighten it.
• The paint pot is not bit tight enough. grab the paint pot and rotate the spray gun.
• The paint needs to be further diluted or stirred.
• Q: I stopped spraying during use. what’s the problem?
• Answer: There are the following five situations:
• The liquid nozzle may be blocked by paint. Similarly. check whether the air supply hole under the liquid nozzle is unblocked.
• The paint concentration is too high. so reduce the flow rate.
• The paint dries off before it is sprayed on the work surface.
• Move the spray gun closer to–point the working surface before spraying.
• The spray gun is not perpendicular to the plane. Keep your wrists and arms straight and move your whole body. and keep a certain distance between the spray gun and the plane
• Related Products: automatic terminal machine.magnetic drill.induction heating machine.edge band trimming machine.probe holder.lamino slotting machine.meat cutter.3 jaw lathe chuck.air pneumatic valve guide.wet air polisher.22pcs keyway broach set.spot welder