Eastwood PCS-250 Dual Voltage Powder Coating Gun Starter Kit

Eastwood PCS-250 Dual Voltage Powder Coating Gun

The Eastwood PCS-250 Dual-Voltage HotCoat? Powder Coating Gun gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun. an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. This new and improved gun features color-coded cabling. larger ground clamp. increased trigger room and a clear bottle so you can see the powder color and fluidizing action.

Eastwood Powder Coating Accessories Kit

This accessories kit comes with the items you need to start powder coating.

The high temperature tape and silicone plugs make it easy to mask areas you do not want to get powder on. The safety wire is great for hanging parts on your powder coating rack or oven. This kit also comes with an in-line air filter to keep contaminates out of your gun and powder. Also included is an 8 oz. bottle of high gloss black powder and extra storage bottles.

Specifications

15KV/25KV dual voltage output
New and improved ground clamp provides a better ground
Color coordinated cabling for easier setup
New clear bottle makes it easy to see powder level and fluidizing action
Additional 1/2 of trigger room makes it easier and more comfortable to use

Contents

33278 Eastwood PCS-250 Dual Voltage Powder Coating Gun
10078 Eastwood Hi Temp Silcone Plugs Assortment Of 30
10198B Eastwood Hotcoat Powder Coat Bottle And Lid Replacement Set 3 Pak
16307 Eastwood HotCoat? Powder Coat High Gloss Jet Black – 8oz
16322 Eastwood HotCoat? 1/2 Inch x 36 yd Fiberglass High Temp Masking Tape
31635 Eastwood Air In Line Air Filter
43045 Safety Wire .041in 1 lb spool

• This kit comes with the items you need to start powder coating. Just add compressed air and a curing oven or lamp
• Two settings for improved coverage – Low 15.000-volt setting and High 25.000-volt setting for multi-coat coverage over larger areas
• Provides increased powder adhesion and minimal overspray
• Larger internal passages for improved powder flow and refined power supply for more consistent coverage and powder-build
• Includes 30 Silcone Plugs Assortment and High Temp Tape. Set of 3 Bottles and Lids. High Gloss Black Powder. Spool of Wire and Filter