AIRCAT 3 DC Electric Palm Sander 3 Speeds

The AIRCAT 6700-DCE-3 is a 3" DC Electric sander/Polisher that comes with a 20′ foot low voltage DC cable. DC adapter. cable to Plug into outlet. 1 foam polishing pad. 1 Lambs Wool polishing pad. Designed for home use. where compressed air is not practical or not available. The DC current renders the tool shock free. It has 3 speeds – 4000. 7000. 10. 000 RPM. Extremely quiet only 70dBA. Very low vibration – 0.5M/sec2. Clean – No exhaust. No air borne oil. No blowing of dust and particles. More efficient than air as the Electric motor maintains 85% of its speed under load vs. 60% for air sanders. Please read operating instructions!! once you Plug it in and activate the DC converter box hold the lever down and start button at the same time to start the sander. There is a slight delay as this is normal. To Change speeds Press the start button again. Here are the full Specs: Spindle size 5/16" x 24. 3/16" orbit. weighs 1.98 lbs. 8.9" long. 2 year warranty

• Three push button speed settings 4.000. 7.000. and 10.000 allows for sanding. compounding and polishing
• No exhaust air. no air bourne oil. no blowing of dust and particles
• The DC current renders the tool shock hazard free and totally safe to use. the 20′ low voltage DC cable allows use around vehicles and in industrial fabrication and assembly areas
• Air sanders only maintain 60% of their speed under load. while the AIRCAT DC Electric Sander maintains 85% of its speed under load
• 80% energy savings compared to running a compressor to power an air sander