2024 New Power Feed Z-Axis for Mills.450 in-lbs Torque.0-200RPM Benchtop Mill Power Feed 110V.for Bridgeport and Some Knee Mills with 5/8 Diameter Shafts On The End

Product Description

• ??Basic parameters??Z-axis power feed is made of aluminum; power parameters: 90 watts. 110V input voltage. 50/60Hz. single phase; rotation speed: 0-200 RPM. Maximum torque: 450in-lb; Maximum feed speed: 650mm/min; Maximum return speed: 850mm/min. This power feed is suitable for some milling machines such as Bridgeport. Precision Matthews. Enco. Jet. Sharp. Acer. Webb. etc.
• ??Portable and Easy to Install??This milling machine power supply is compact and portable. weighing only 3.75 kg/8.27 lbs and small in size. Install this power supply by yourself according to the instructions. even if you are a novice. you can operate it skillfully
• ??Dual Control Mode??You can set this power feed to automatically work at a constant speed. freeing your hands and improving efficiency. or you can manually adjust the speed control knob to get more precise milling work. the dual control mode can provide excellent throughout the range Speed control to meet your different needs.
• ??High Efficiency Design??Equipped with Gleason spiral bevel gear. the transmission ratio is stable during use. the transmission noise is small. the efficiency is high. and the load-bearing capacity is strong. Special safety devices protect the transmission plastic gears and electronic components from damage.
• ??Wide Application??This milling machine power feed is suitable for some vertical knee milling machines with the same installation mode and 5/8 end diameter shaft. such as Bridgeport. Precision Matthews. Enco. Jet. Sharp. Acer. Webb but not suitable for those with There are milling machines with different mounting patterns or different size wires and some other odd sized machines. so please double check before buying that your machine is the typical Bridgeport type mentioned above.