Model 930 STRiPiNATOR ? Scrap Wire Stripping Machine by BLUEROCK ? Tools

Large Floor Standing. 120V Plug-In Copper Wire Stripper

Attributes:

• 11 cutting channels. cut different wire types and sizes without constant adjustment (including Romex?)
• 2 cut and 2 feed rollers pull wire in automatically and cut thicker wires on both top and bottom in a single pass
• Spring suspension allow for wire imperfections and consistent cutting pressure
• 2-Horsepower 120V AC motor (no DC transformers or rectifiers)
• Heavy duty 265lb industrial grade steel machine ships in a wood and metal crate
• Free Fedex shipping to most of the USA lower 48 statuss (see below for full details)

• • Power Supply: 120V. 60Hz. 1.5KW.
  • Wire Range: .064 (14 AWG) – 1.18 (600MCM) or in metric (2mm-30mm)
  • 11 Channels of Cutters – 15 Blades
  • 2HP Motor: 120V. 60Hz. 1.5Kw. single phase. standard Type-B plug (3-prong grounded)
  • Strips Certain ROMEX?Brand Cable or other NM Cables
  • Heavy Duty High Standard On/Off Switch with built in Overload Protection
  • Combines Gear and Belt Driven Function
  • Cutting Speed: Approximately 125′ per minute
  • Strips both copper and aluminum. solid and stranded. single and multi-conductor wires!
• This machine has two sets of cutter/rollers. It’s made to cut the tops and bottoms of larger wires and the bottoms only on smaller wire. The spring loaded mechanism on the top allows you to adjust the tension of the cutters depending on what wire or jacket size you are cutting. You can cut two wires at once if you want. Also. .064 is approximately 14 AWG. I’ve cut smaller wire (16 AWG) with one of these in the past. It’s rated to cut up to 30mm (1.18).
  
  
  Give us a call if you have any questions about our machine at 206-604-8363