Type 160 Animal Feed Pellet Mill Machine Chicken Birds Manual 220V 3MM 4.5KW 200KG/H

Introduction:
Feed granulator is widely used in large. medium and small aquaculture. grain feed processing plants. livestock farms. poultry farms. individual farmers and small and medium-sized farms. farmers or large. medium and small feed processing plants. This machine can be used alone. and customers who need it can also match it with a straw cutter for better results.
Note:
Before using the machine. it is necessary to adjust the screw of the pressure roller to the appropriate position. The pressure roller and the pressure plate should be closely combined. and the three adjusting screws should be on the same horizontal plane.
Please fill the oil tank before using the machine. Do not idle the machine for more than 2 minutes.
Double-check the belt and the screws before operation.
Clean up the rest after use to prevent damage to the machine.
If the pressure roller cannot rotate normally. please tighten the screws that control the pressure roller first. and then try to power it on. If it still does not work. you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again (without special tightening)
We suggest that high-power machines should be directly connected to the main power supply. as the voltage reaching the machine is stable. If the voltage is unstable and the current exceeds the rated current of the motor. it is easy to burn out the starting capacitor.
It is recommended to directly connect to the power supply as much as possible. If the machine is not connected to the power supply. different situations may occur. and the wires are not durable. The wires will gradually burn out over time.

Parameter:
Length: 32.67IN
Width: 12.99IN
Height: 30.18IN
Weight: 182.99LB

Items Included: 239172-EnzY
Chicken Feed Pellet Mill Machine 3MM

• Adjustable nut Used to adjust the distance between the pressure roller and the grinding disc. When making pellets. the nuts on the three sides must be balanced to avoid damage to the pressure roller and grinding disc. If the pressure roller cannot rotate normally. please tighten the screws that control the pressure roller first. and then try to power it on. If it still does not work. you can appropriately loosen the screws next to the pressure roller and then tighten them slightly again.(Without special tightening.)
• It is recommended to add high-quality machine oil or hyperbola heavy-duty gear oil. After using the machine for a period of time. the customer needs to add butter to lubricate the grinding chamber here (approximately 4-6 months of use) (the butter gun and butter need to be purchased by the customer themselves. and we do not provide them).
• This machine is equipped with an enlarged and widened discharge port to prevent feed splashing and facilitate the collection of feed by customers.
• The machine adopts the design of enlarged feed port. which makes it more convenient for you to feed and effectively improves work efficiency. The length of feed particlescan be adjusted. Nylon wheels are adopted. which are more wear-resistant and durable.
• This machine is equipped with a voltage display. which can visually see whether the voltage is stable. The machine is equipped with air switch. which is safer to use.