VIAIR 30018 200 PSI Hi-Pressure 2 on 2 System

VIAIR 2On2 Systems allow the installation of a capable dual compressor onboard air system in your Jeep. 2On2 Systems are Plug & Play and provide a simplified installation of your onboard air system. without the need to find space under your rig. where components can be damaged. Available either as a JK-specific item (with cross member mounting bracket). or as a universal kit that must be installed inside your vehicle. all VIAIR 2On2. Kits include: 2 air compressors. a 2 gallon six port air tank. Environmentally-sealed power connectors. Wiring harness. Air manifold. Safety valve. Pressure switch and Mounting hardware.
200 PSI Hi-Pressure 2 On 2’s:

• 2.0 gal 5-Port Air Tank
• 2 380C Air Compressors
• 2 1/4 Stainless Steel Braided Leader Hoses
• 2 1/4 JIC Fittings on Leader Hoses
• 1/4 NPT Swivel to 1/4 NPT Swivel
• T-Fitting Remote Mount Filter
• 1/4 NPT Drain Cock
• Sealed Pressure Switch with Delphi Connectors
• 165 PSI On. 200 PSI Off
• 2 Loomed Compressor Wires Terminated with Delphi Connectors
• Inline Fuse Holder with Fuse
• 1/4 NPT Safety Valve
• 4 1/4 NPT M Recessed Plugs
• 60-amp Fuse and Fuse Holder
• 80-amp Relay
• 2 1/4 BSP Adapters for Air Lockers
• T-Fitting 1/4 NPT F x 1/4 NPT F x 1/4 NPT M
• 1/8 to 1/4 NPT Reducer
• Wiring Harness with Delphi Connectors
• 2 Delphi Connector Plug Kits
• Billet 1/4 NPT x 6-Port Manifold and Mounting Bracket
• Air Filter Housing with Installed Element
• 2 Replacement Air Filter Elements
• Dash Panel Air Pressure Gauge 0-160 PSI Illuminated
• Air Pressure Regulator
• 15′ DOT Air Line
• 12-Volt
• Permanent Magnetic Motor
• Duty Cycle: 100 percent @ 100 PSI 55 percent @ 200 PSI
• Max. Working Pressure: 200 PSI
• Max. Amp Draw: 44 Amps
• Dimensions: 18.5L x 5.9W x 13.5H
• Net Weight: 30 lbs