Description
It is made of high-quality materials. with exquisite workmanship and long-term use.
The surface of the rotor is coated with imported epoxy resin glue to prevent adsorption burrs on the biot surface of the rotor.
The magnetic field of the motor is more stable. the torque is larger than that of similar products. the motor runs smoother. more stable. the noise is lower. and the service life is longer.
It saves electric energy and has low calorific value. light weight and easy installation.
The sound of the motor is low. the friction is small. and the noise is reduced.
- 1 pc — 4th Axis 80mm 3 Jaw Chuck ( Positive jaw and counter jaw )
- 80MM three jaw self-centering chuck
- Center Height 65mm
- Total height. 105MM
- Angle. 0.036 degree/step
- Reduction ratio:50:1 (synchronous deceleration mode)
- Magnetic stepping motor: Two-phase 57 step motor Four-wire
- Tip: We have 50:1 reduction gearbox and 100:1 reduction gearbox.
- If you need 100:1 reduction gearbox.please tell !!
- The system settings: the pulses for 1 required:
- ( the motor 1 Circle of pulse number ?? the drive of subdivision number ?? reduction ratio) ?? 360 degrees
- For example. the two-phase 57 motor. the ubdivision number 16. the reduction ratio 50:1
- (200 ?? 16 ?? 50) ?? 360 = 444.44444444)
- Ncstudio system settings: the angle of a pulse walking:
- 360 ?? (the motor 1 Circle of pulse numberr ?? ?? the drive of subdivision number ?? reduction ratio)
- For example: the two-phase 57 motor. the breakdown of the number 16. reduction ratio 50:1
- 360 ?? (200 ?? 16 ?? 50) = 0.00225
- X or Y axis instead of the algorithm is:
- Circumference ?? (the motor 1 Circle of pulse numberr ?? ?? the drive of subdivision number ?? reduction ratio)
- Engraving different sizes of round bars. equivalent needs to be set
- Nema23 57x56mm
- Shaft Diameter: 6.35 mm
- Shaft length: 25.5mm
- Step Angle:1.8
- Current: 3A
- Voltage: 2.85V
- Temperature Rise :80 c max
- Ambient Temperature:-20 c–+50 c
- Phase No. : 2
- Insulation Resistance: 100MOhm(500V DC)
- Holding Torque: 9.0kg.cm
Specifications
| Condition | New |
| Brand | Anni |
Reviews
There are no reviews yet.