Ridgid 26092 1/2 in. – 4 in. NPT Hammer Chuck Threading Machine

• Threads 1/4-2 pipe at 36 RPM and 2 1/2- 4 at 12 RPM
• Shown on optional No. 200A stand.
• The 1224 threads a wide range of pipe including black. galvanized and plastic-coated pipe. together with stainless steel. IMC and heavy-wall conduit. as well as rod up to 30 Rockwell C
• A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced
• An induction motor helps insure sound levels well within the limits set by the regulating authorities
• 1/4 – 2 Universal Die Head; 2 1/2 – 4 receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads
• Constant and proper lubrication of dies and workpiece with through-head oiling
• Motor Control: Reverse/off/forward. heavy-duty rotary-type and integral foot switch
• Gear Box: Two-speed gear box 3:1 ratio
• Chuck: Hammer-type with replaceable rocker-action jaw inserts

Shown on optional No. 200A stand. Threads 1/4"-2" pipe at 36 RPM and 2 1/2"- 4" at 12 RPM. The 1224 threads a wide range of pipe including black. galvanized and plastic-coated pipe. together with stainless steel. IMC and heavy-wall conduit. as well as rod up to 30 Rockwell C. An induction motor helps insure sound levels well within the limits set by the regulating authorities. A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced. 1/4" – 2" Universal Die Head; 2 1/2" – 4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpiece with through-head oiling. Motor Control: Reverse/off/forward. heavy-duty rotary-type and integral foot switch. Gear Box: Two-speed gear box 3:1 ratio. Chuck: Hammer-type with replaceable rocker-action jaw inserts. Oiling: Through-die head. Pump: Self-priming. GEROTO-type. automatic-reversing. constant-flow.