Description
Name: Hardback version high pressure pneumatic pump
Voltage: 110V
Power: 1800W
Working pressure: 300BAR/ 30MPA/ 4500PSI
Work flow: 50L/min
Material: Aluminum
Product size: 360*180*370 mm / 14.17*7.09*14.56in
Package size: 49*50*32CM
Inflating speed: 2800r/min
Noise: MAX 78DB
Weight: 35.7lb/16.2Kg
Filling Time: 10mins per 1L tank Valve Quantity
Cooling System: water cooling
Notice:
1. Please add lubricating oil before you start using the machine first. No. 46 or No. 68 wear resistant hydraulic oil. Don’t forget to put the lube oil into the compressor before running.
2. Make sure the socket could withstand a current greater than 8A before using it. or the circuit might be burnt. the product might be damaged and the dangers may be caused due to overload of the socket.
3. When running. if the machine vibrates violently. please add pad or towel under the compressor.
4. When the compressor working. the cooling system must be working at the same time.
5. The machine must not be working without oil. so you must pay attention to the level of oil.
6. Please do not touch the head section after the machine was just being used. so as to not be burnt by high temperature.
Item included: 022268
PreAsion Electric High Pressure Air Compressor Hardback Version
- Manual water distribution valve. which can drain the oil-water mixture after each inflation.
- Safety valve. control the gas pressure of the low-pressure part to prevent the failure of the high-pressure parts of the machine from causing the backflow of the high-pressure gas and damage to the low-pressure parts.
- Oil-water separator. and the fiber cotton is finely filtered to separate suspended particles above 0.01 microns. and the cleanliness is as high as 99.998%.
- The saturation of the fiber cotton can be judged by the working time. and it should be replaced once every 50 minutes accumulated working. Please follow the operating instructions.
- Manual drain valve. drain the oil-water mixture after each inflation.
- Brass sintered filter element. can filter impurity particles with a diameter of more than 5 microns.
Specifications
Features | Equipment High Pressure Inflation; for Fire Fighting and Diving |
Assembled Product Dimensions (L x W x H) | 14.17 x 7.09 x 14.56 Inches |
Reviews
There are no reviews yet.