INTSUPERMAI Wood Pellet Machine Biomass Fuel Wood Sawdust Straw Pellet Making Machine 220V 6mm

Introduction:
The small biomass processing pellet machine is extremely outstanding in terms of energy conservation and efficiency. It has unique effects and environmental benefits. and can turn straw and waste into treasure. It helps us solve the problem of storing or treating agricultural and forestry waste such as corn straw scales. cotton stalks. wood bran. wood powder. sawdust. peanut shells. rice husks. etc.
This machine uses waste wood to make fuel. which can replace gas and natural gas. Moreover. the fuel incineration displacement is lower. making it more environmentally friendly.

Note:
1. This machine is 220V three-phase. please pay attention to wiring issues when using it.
2. Before starting the machine.open the upper shell of the particle machine to determine if the nut above the pressure roller is secure. If there is any looseness. use a wrench to tighten it.
3. After connecting the power supply. turn on the machine to check if the rotation direction of the pressure roller is correct (counterclockwise direction).
4. Before starting the machine. please check whether the oil level inside the box meets the requirements and ensure that it is at the normal oil level (two-thirds of the oil mirror).
5. Check the oil temperature after 10 minutes of load operation. and the temperature rise should not exceed 50 ??.
6. Please carry out daily maintenance and do not accumulate dust and oil stains on the outer frame of the gearbox to avoid affecting heat dissipation.
7.Remove the rubber ring from the brass vent nut before starting.
8.Replace the LCKC150#200# gear oil after 500 hours of use for the first oil change.

Parameter:
Voltage??220V three-phase electricity
Power: 7500W
Production: 60KG
Wood chip particle combustion value: 3000-4300 kcal/kg.
Feed hopper inside diameter: 11in(28cm)
Feed hopper outside diameter: 12.2in(31cm)
Outlet size: 8.86in*6.1in(22.5*15.5cm)

Items Included: 239677
Wood pellet machine 6MM 220V

• ??Fuselage Shell??Thickened steel body shell using ductile iron cast into the whole spray painting process. bright color. beautiful and generous.
• ??Pure Copper Motor??Stable performance. fast heat dissipation. low noise. strong power. high efficiency.
• ??Roller Grinding Plate??The coarse press wheel is increased. and the design of the grinding disc is made of excellent chromium pressing shaft and grinding disc. so that the material is stirred evenly.
• ??Long Time Service??Excellent material. stable structure. suitable for long-term operation. reduce the failure rate.
• ??Application??It mainly use biomass from agricultural and forestry processing such as wood chips.straw. rice husk. bark and other biomass as raw materials. and solidify it into high-density pellet fuel through pretreatment and processing.
• It suitable for any kinds of car wheels. mount-demount tyres from the rims.