DENEST Gas Powered Demolition Jack Hammer 52CC 1700W Concrete Floor Breaker 700-1500BPM

Description
Good tools are indispensable for the complicated work of breaking up concrete and block. Made of high-quality steel and PP. and adopting a painting process. this item lays a foundation for your long-term use. 1900W power. 52cc two-stroke engine. and 6500 r/min speed can greatly improve your efficiency. With it. you can completely say goodbye to the traditional breaking method and work more easily.
 
Key Features
Bulid to Last: High-quality steel and PP. and painting process make this product solid. wear-resistant. impact-resistant. and rustproof. so it can keep beautiful and practical without frequent replacement.
 
High Efficiency: The 52cc 2-stroke engine. 1900W power. 6500r/min speed. and 3.5Nm torque provide impact energy of up to 20-55J and impact times of 1500bpm. so it can efficiently help you do various heavy-duty works.
 
Good Heat Dissipation: The air cooling model and multiple cooling holes on the body can timely reduce the temperature of the product in the process of operation. and avoid potential safety hazards. thus extending the product’s service life.
 
Sturdy & Reliability: It features a commercial grade unit. toughened crankshaft. ball bearing construction. accurate thumb throttle control. and a high tensile gear set. so this item can realize maximum reliability.
 
Large Capacity: 1.3L/54.95oz oil tank avoids frequent refueling and improves working efficiency. 

 
Details
Round Corners: Compared with traditional square corners. an arc design can better care for your skin.
 
Two Chisels: Two chisels of different shapes allow wider application. and it is also convenient for you to replace.
 
Oil Filler: The filler with a large opening is convenient for you to add oil in time. 
 
Application
This product is suitable for on-site work without a power supply or under wet conditions. such as foundation removal. lane removal. reinforced concrete floor or wall removal. penetrating hard rock. asphalt removal. trenching operation. driving grounding rod. farmland fence. and highway guardrail piling. etc. It is also suitable for the compaction of loose material if suitable parts are connected. 
 
Specification 
Material: Steel. PP
Surface Treatment: Painting
Model: 125A
Engine Type: 44*34mm/17.32*13.39inch Air-Cooled Single-Cylinder Two-Stroke 
Fuel: Mixed Oil
Ratio: 25: 1(92#Gasoline: Motor Oil)
Fuel Tank Capacity: 1.3L/54.95oz
Displacement: 52cc 
Fuel Consumption Rate: ??0.6L/h /25.36oz/h
Impact Energy: 20-55J 
Impact Times: 1500bpm 
Max. Power And Speed:1.9kw/6500r/min 
Max. Torque And Speed:3.5Nm/5000r/min
Color: Black+Red
Style: Modern
Power Source: Gasoline Powered
Starter System: Hand Pull Start
Carburetor Type: H119-6A-00-210
Spark Plug Type: BM6A
Number of Items: 1
Number of Chisels: 2
Assembly Required: Yes
Mount Type: Floor Standing
Product Size: 40*27*95cm/15.75*10.62*37.4inch
Chisel Type: Pin Card Type (Without Thread) 28*400mm (1.1*15.75inch)
 
 
Package Included
1*Demolition Jack Hammer
1*Pointed Chisel
1*Flat Chisel
1*Tool Kit Set
1*Oil feeder
1*English Manual
 
 
Notes
Please install and use it in strict accordance with the instructions. and pay attention to the safety precautions inside.
After each use. please check the tightness of the screws in oil filler.
Please use butter and add it to the oil eye. After 20 hours of use. please add 30-50g of butter.
Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. and make sure you do not mind before ordering.

• Bulid to Last: High-quality steel and PP. and painting process make this product solid. wear-resistant. impact-resistant. and rustproof. so it can keep beautiful and practical without frequent replacement.
• High Efficiency: The 52cc 2-stroke engine. 1900W power. 6500r/min speed. and 3.5Nm torque provide impact energy of up to 20-55J and impact times of 1500bpm. so it can efficiently help you do various heavy-duty works.
• Good Heat Dissipation: The air cooling model and multiple cooling holes on the body can timely reduce the temperature of the product in the process of operation. and avoid potential safety hazards. thus extending the product’s service life.
•  
  Sturdy & Reliability: It features a commercial grade unit. toughened crankshaft. ball bearing construction. accurate thumb throttle control. and a high tensile gear set. so this item can realize maximum reliability.
• Large Capacity: 1.3L/54.95oz oil tank avoids frequent refueling and improves working efficiency. 
•  
  Save Money: The high-quality carburetor makes the gasoline fully burn when driving. and the fuel consumption is less than 0.6L/25.36oz/h. so your cost can be saved.
• Elaborate Design: This product is mainly powered by gasoline without wire limitation. which provides more convenience for you to use outdoors.
• Simple Installation and Use: The simple structure. detailed manual. ergonomic. anti-slip. and shock-absorbing double handles. starting device. and complete accessories ensure that you can complete the installation and start using it in a short time.
• Complete Kit: The combination of an oil feeder. two chisels. an installation kit. etc. provides more convenience for you to use. and you do not need to buy extra.
• Effortless Cleaning: The smooth surface allows you to easily remove dust and residues with a towel and water.