Power Feed X-Axis for Milling Machine 450 in-lb Torque. 0-200RPM Table Milling Machine Power Feed 110V.for Bridgeport and Other Knee Type Mills with a 5/8 Diameter Shaft on the End

Specification:
Type: X traverse
Model: 450 in-lb X-Axis
Voltage: 110 V. 50/60 Hz
Rotate speed: 0-200 RPM
Max torque: 450 in-lb
Max feed rate: 650 mm/min
Max return speed: 850 mm/min
Package size: 12.59 x 11.22 x 7.87 inches
Package weight: 12.8 lb

Package Including
1 x Product Manual
8 x Adjustable Pad
2 x Tiavel Stop Assembly
1 x Adapter; 1 x Bevel Gear
1 x Dial Nut ;1 x Locking Nut
1 x Power Feed For Milling Machine

???BASIC PARAMETERS???X-Axis power feed is made of aluminuml;Power Parameter:110V input voltage.50/60Hz.single phase power;Rotate Speed:0-200 RPM.Max Torque:450in-lb;Max feed rate: 650mm/min; Max return speed: 850mm/min.This power feed fits some milling machines like Bridgeport.Precision Matthews.Grizzly.Enco.Jet.Sharp.Acer.Webb.GMC.Kent.Clark.Supermax.Enco.Turn Pro.Vectrax.Acra.Birmingham.Accu.etc…

???PORTABLE AND EASY TO INSTALL???This power feed for milling machine is compact and portable. its weight: 5.82kg/12.8lb. size: 7*3.5*12.8 inch. And whether it is for a novice or a skilled operator. it is very easy to install this power feed according to the instruction or by yourself.

???STABLE AND EFFICIENT???This power feed adopts Gleason Spiral Bevel Gear with advantages of stable transmission ratio.low transmission noise.high transmission efficiency and high bearing capacity.And the safety mechanism of this table mill power feed protects the gears and electronics for your table milling needs.

???AUTOMATIC AND MANUAL CONTROL???This multifunctional milling machine power feed can work in the entire range according to your needs. you can set it to work at automatic constant speed to free your hands or work by manually adjusting the speed control knob. And the limit switch design automatically protects the transmission gear and electronic components throughout the process.

???WIDE APPLICATION???This power table feed fits almost any vertical knee type mill with the same mounting pattern and a 5/8 diameter shaft on the end.But it will NOT fit mills with a different mounting pattern or different sized leadscrews like powermatic and some other odd sized machines. so please make sure yours is the typical Bridgeport type as mentioned above.NOTE:Any shipping damage or using problems. please feel free to cantact us. we will solve them for you.