Air Straight Die Grinder Multifunctional Pneumatic Grinding Drilling Tool 3500RPM 1/4in Intake Industrial supplies

1.PRODUCT STRUCTURE: This pneumatic grinder adopts a 75MM drive shaft. and has roller bearing. deep groove bearing. 2 idlers and rotating muffler cover. etc.
2.EXCELLENT MATERIAL: Using zinc alloy and aluminum materials. light in weight. corrosion and wear resistance. and not easy to deform after long term use.
3.COMFORTABLE GRIP: This pneumatic straight grinder is wrapped in red sheath. with ergonomic design. comfortable to hold. suitable for single hand operation.
4.SAFE OPERATION: Rear exhaust muffler design reduces sound levels for safe operation. and intake filter prevents mold grinder contamination.
5.MULTIPLE USAGES: The pneumatic tool can be used for tire repair. handicraft and wood grinding. stone polishing. irregular plane. arc and dead corner processing. etc.

1 x Host

1 x Grip

1 x Wrench

1 x Intake Port

1 x Iron Ring

Item Type: Air Die Grinder
Material: Zinc Alloy. Aluminum
No Load Speed: 3500RPM
Air Pressure: 90psi (6.3kg/cm2)
Air Consumption: 4.0cfm
Air Inlet: 1/4in
Product Length: Approx. 240mm / 9.4in
Operation Suggestion: 1. Before and after use every day. please inject 2?3CC of 60 pneumatic lubricating oil (sewing machine oil) from the air inlet 2. Let the machine idle for a few seconds after filling with oil 3. Generally. the air source compressed by the traditional air compressor contains water. and the lubricating oil in the air compressor brought out by the aircompressor piston. If the oil water separator is not used. the water and oil enter the pneumatic tool with the air. which will cause wind If the blade is stuck. once the tool is started. the blade will not be thrown away. and it may not even be able to start. If it can be started. the torsion will be insufficient. Be sure to pay attention to refueling regularly to keep the tool at normal torsion.Air Straight Die Grinder Multifunctional Pneumatic Grinding Drilling Tool 3500RPM 1/4in Intake Industrial supplies